UK 5-MTK-P/P

https://www.phoenixcontact.com/us/products/3004032 Knife disconnect terminal block - UK 5-MTK-P/P - 3004032 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Knife disconnect terminal block, With test socket screws for insertion of test plugs, Connection type: Screw connection, Cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, Nominal current: 16 A, Nominal voltage: 500 V, Length: 51 mm, Width: 6.2 mm, Color: gray, Assembly: NS 32, NS 35/7,5, NS 35/15 Product Features  Space-saving design  High current carrying capacity of up to 16 A   Key Commercial Data Packing unit 1 pc GTIN Weight per Piece (excluding packing) 13.2 g Custom tariff number 85369010 Country of origin Germany Technical data General Number of levels 1 Number of connections 2 Nominal cross section 4 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 6 kV Pollution degree 3 Overvoltage category III Insulating material group I 11/03/2015   Page 1 / 6 https://www.phoenixcontact.com/us/products/3004032 Knife disconnect terminal block - UK 5-MTK-P/P - 3004032 Technical data General Connection in acc. with standard IEC 60947-7-1 Nominal current IN 16 A Maximum load current 16 A (with 4 mm² conductor cross section) Nominal voltage UN 500 V Open side panel nein Number of positions 1 Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Surge voltage test setpoint 7.3 kV Result of surge voltage test Test passed Power frequency withstand voltage setpoint 1.89 kV Result of power-frequency withstand voltage test Test passed Checking the mechanical stability of terminal points (5 x conductor connection) Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.2 mm² / 0.2 kg 4 mm² / 0.9 kg 2 6 mm / 1.4 kg Result of bending test Test passed Conductor cross section tensile test 0.2 mm² Tractive force setpoint 10 N Conductor cross section tensile test 4 mm² Tractive force setpoint 60 N Conductor cross section tensile test 6 mm² Tractive force setpoint 80 N Tensile test result Test passed Tight fit on carrier NS 32/NS 35 Setpoint 1N Result of tight fit test Test passed Requirements, voltage drop ≤ 6,4 mV Result of voltage drop test Test passed Temperature-rise test Test passed Conductor cross section short circuit testing 6 mm² Short-time current 0.18 kA Short circuit stability result Test passed 11/03/2015   Page 2 / 6 https://www.phoenixcontact.com/us/products/3004032 Knife disconnect terminal block - UK 5-MTK-P/P - 3004032 Technical data General Proof of thermal characteristics (needle flame) effective duration 30 s Result of thermal test Test passed Temperature index, insulating material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Dimensions Width 6.2 mm Length 51 mm Height NS 35/7,5 58.5 mm Height NS 35/15 66 mm Height NS 32 63.5 mm Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 6 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 4 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 2.5 mm² sleeve, max. Cross section with insertion bridge, solid max. 4 mm² Cross section with insertion bridge, stranded max. 4 mm² Connection method Screw connection Stripping length 8 mm Internal cylindrical gage A3 11/03/2015   Page 3 / 6 https://www.phoenixcontact.com/us/products/3004032 Knife disconnect terminal block - UK 5-MTK-P/P - 3004032 Technical data Connection data Screw thread M3 Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Classifications eCl@ss eCl@ss 4.0 27141117 eCl@ss 4.1 27141117 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141126 eCl@ss 8.0 27141126 ETIM ETIM 2.0 EC000902 ETIM 3.0 EC000902 ETIM 4.0 EC000902 ETIM 5.0 EC000902 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals CSA / UL Recognized / cUL Recognized / PRS / EAC / EAC / cULus Recognized Ex Approvals 11/03/2015   Page 4 / 6 https://www.phoenixcontact.com/us/products/3004032 Knife disconnect terminal block - UK 5-MTK-P/P - 3004032 Approvals Approvals submitted Approval details CSA      mm²/AWG/kcmil 18-10 Nominal current IN 15 A Nominal voltage UN 300 V UL Recognized      mm²/AWG/kcmil 22-12 Nominal current IN 15 A Nominal voltage UN 600 V cUL Recognized      mm²/AWG/kcmil 22-12 Nominal current IN 15 A Nominal voltage UN 600 V PRS  EAC  EAC  cULus Recognized  11/03/2015   Page 5 / 6 https://www.phoenixcontact.com/us/products/3004032 Knife disconnect terminal block - UK 5-MTK-P/P - 3004032 Drawings Circuit diagram Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 11/03/2015   Page 6 / 6